(the reason why won’t my led lights turn on is because it has an issue that relates to its faulty circuits. The solution is to check if your connection or wires of LED strips have enough power voltage.)
LED Strips come in a variety of colors, densities, and sizes. These LED light strips are very easy to install and also make the area where they installed them. To decorate your room or house you might need a set-up of LED strips. But the problem comes when you are wondering why won’t my led lights turn on.
Don’t be too stressed about it because a lot of LED strips have these types of common issues and problems. In this article, we are going to give you the details about what are the main reasons and how you can solve them.
What are the Main Reasons Why Your LED Light Strips are Not Turning On?
If you are still upset why won’t my led lights turn on? Then, you must take a look at these reasons to find out the issue and problem with your LED Light Strips.
- Faulty Circuits:
When you are going to install your LED light strips you must check whether your power unit or defective driver is in the right condition or not. In this type of case, not only does the bulb burn out but it also burns the other part of the LEDs that are connected to this circuit. That’s why you need to check or test all the switching resistance before purchasing from the manufacturer.
Solutions: Before Purchasing it make sure that you don’t buy a cheap or defective product. Moreover, also test the bulbs of the strip while purchasing.
- Bad Capacitor:
The most common reason why your LED light strip is working is because of a Bad capacitor. Additionally, the Bad capacitors are the circuitry little pieces that are used in LED Strips. These little circuitry pieces help the light to work properly. Moreover, if the issue occurs in these circuitry parts then your LED Light might stop working properly.
Solution: If the issue occurs in these little circuitry pieces then you don’t need to buy a completely new LED strip. Just change these capacitors and your LED starts working.
- Low-Quality Strips:
Ensure that you buy a High-Quality LED strip because when you buy a high-quality product it will give you better results rather than a low-quality product. You might notice the low-quality LED light strips are a little bit dim and flicker when you connect them to the power supply circuit.
Solution: Check the quality of the LED light strip while purchasing. Test them at the time of purchase to switch them into any nearby circuit.
- Wrong Connection:
As we know LED lights hold an RGB color that makes your décor more unique and beautiful. As a lot of LED strips hold the mixed colors. so, in that case, every strip has its wire. Check that you connect a wire with its appropriate circuit because each wire has its position for a connection.
Solution: You need to be attentive while making a connection because each wire has its different colors. So, you need to attach the specific wire to its exact place.
- Wrong Cutting:
If your LED light is too long, then you must cut it to design your area. To give you ease, the manufacturers of the LED light strips draw a clear line or a scissor sign where you can cut an LED strip with the help of scissors. If you cut it from the wrong position, then the whole section of your LED light goes dead.
Solution: Keep in mind that when you are going to cut the LED light strip, you need to cut it straight. Unfortunately, if you cut them wrong or diagonally. Then, the complete section of your LED light strip is wasted.
- Manufacturer Error:
A lot of LED strips are wrongly manufactured. If you notice any type of dead diode and dead transistors, then you need to replace or repair it with a new or ideal one. When LED strips die due to a failed electrical component, then, it will leave a black mark.
Solutions: To test the dead diodes or dead transistors, you can use a multimeter. Moreover, you can also use a test pad to find out whether the problem is with an LED light strip or with a section.
How to fix your LED light when it does not turn on?
Now, we are going to fix the problem when you wonder why won’t my led lights turn on. Here is the easiest way you can fix it.
- Check Power Supply Voltage:
Before buying an LED light strip always check the input voltage that is marked on the connection point of the LED strips. Additionally, if your power supply does not have enough voltage to lighten up your LED Lights then you need to first check out the power supply voltage of the LED strips that you are going to buy.
For example, if your LED light strips are 24V then, it does not work with a 12 V DC power supply. Moreover, your Xbox also has enough power to lighten up your LED strips. This is also the most common reason that most people face and then they raise their questions like why won’t my led lights turn on?
- Check your connection:
First, you need to check that your LED light strip wire is switched properly. After that, check whether the switches of LED strips are correctly installed or not. Various LED strips might need a connector to attach the cutting LED strip to manage the length.
Furthermore, pay your proper attention while you put them into a connector. That you attach the right side of it because if you don’t attach the right side then surely your LED light stops working and doesn’t light up.
- Use a Connector:
There are a lot of connectors available in the market that will help you when you are facing a problem regarding your LED stopping lightning up as well as when it broke. Moreover, if a little part of your LED light is not then, find out the copper dots on the LED strip.
Take a scissor and carefully cut them from the center of the copper dots. Now, take a connector and simply attach the cutting ends to it. keep in mind that you are connecting the right edge to the right place. this will surely help you and your LED light start glowing.
What happens if your LED strips have power but don’t Lighten Up?
Because of faulty bulbs in your LED strip your LED light stops glowing. Moreover, lack of illumination can also damage and fail the bulbs. To prevent this, take a look at your circuit because a not working or broken switch can also be the reason for that problem.
Moreover, the great power supply can also damage your LED bulbs because every LED strip has the capability of how much power supply it needs. Additionally, this can also be done because of loose connections.
Frequently Asked Questions:
Q. What to do when LED lights won’t turn on?
- First, check your power supply voltage.
- Confirm the Current Rating Compatibility of the LED Strip
- Check whether the Power supply works correctly or not.
- Confirm that there is no visible loose connection.
Q. What causes an LED to stop working?
If you are wondering why my won’t my led lights turn on then, there is a problem with your wiring connection. You need to check that the wire driver connection is working correctly. Moreover, dimmable LED panels can also cause an issue and your LED to stop working.
Q. How do I reset my LED lights?
Before you going to rest your LED lights you need to follow these steps:
- Ensure that your LED light is plugged in.
- After that, you can see the button that is present on the top of the power cord.
- Press it and hold it continuously for at least 10 seconds.
- Now, wait for 1 minute and it will automatically turn on.
Q. Why is the power to my LED lights not working?
Because your LED light Bulbs are damaged or faulty. In most cases, if your LED lights are too old or it has been too long to buy them. then, their bulbs might stop working or become broken. Moreover, the bulbs have become faulty because of broken switches and malfunctioning.
Your LED light stops working because of many reasons. In a lot of cases, the issue is not in the LED light Strip but in the external power sources. Some issues occur when the power supply affects your LED working.
So, before placing your LED light strip make sure that your circuits are working properly. Moreover, when you wonder and think why won’t my led lights turn on and you cannot see any external issue then there is the possibility that your LED bulbs or strips are faulty.
To resolve this issue, you need to change or replace your entire LED strip. Additionally, to prevent replacing all the strips use some techniques to resolve the issue. These techniques and methods will surely help you and you can avoid purchasing new LED lights.
For more information visit voxblend.com