Why Is My Ring Doorbell Flashing Blue? Reasons & Solutions
When a doorbell flashes blue light it means the device is on charging mode or it is connecting with a Wi-Fi Network. Furthermore, it also indicates that the setup of the device is successfully installed. It also tells us that the front button of the device has been booting up or pressed. Moreover, the speaker is also enabled or the factory setting is restored.
In the front of each device, every individual model of the doorbell is prepared with circular LED light. Flashing blue, red, or white patterns offer useful information about doorbell action or tell whether the device currently acts or not. We are going to provide you with all the further details why is my ring doorbell flashing blue.
Why is my ring doorbell flashing blue?
The circular LED lights used in your doorbell give details about its action or the state of the device. Each doorbell model has a different pattern for blue light. That’s why these rings’ patterns are a little bit different from each other. Because of their different model patterns, it is essential to know the details of which model of the doorbell you use and need to understand what this blue light is assigning you.
There are three main categories of doorbell flashing blue LED lights.
- The 1st four Generation of this doorbell model has 3 blue light indicators.
- The Ring Peephole Cam and Doorbell Wired have 6 patterns of blue light.
- Lastly, the model Ring Doorbell Pro and Pro 2 have 7 flashing patterns of blue light.
Understanding why your Ring Doorbell Flashes Blue?
As we already know, the blue light flashes when the doorbell unit is on charging. Furthermore, if the charging of the doorbell is full. Then there might be another reason why the light appears. Moreover, to understand the problem completely, this pattern will also help you. Let’s discover the various ways and what it means when the doorbell flashes blue.
- Spinning: when you see the blue light spinning. Then simply press the doorbell button.
- Moving Upward: when you see the blue light moving upward then it means the light indicates that it is going to connect to a network.
- On and Off: for a second, when the flashing blue light is on and off, then it shows that the doorbell camera is starting to operate. If it continues, then it means you are dealing with a loop boot.
- Constant Blue Light: if the doorbell continually shows the blue light then it means the speakers are turned on.
- White circle: if the doorbell first shows a little blue flash and after that a white circle. This device is performing a factory reset.
1st to 4th Generations of Ring Video Doorbells:
The 1st four generations of ring video doorbells have 3 blue light flashing patterns. Which includes:
- 1st Generation of Ring Video Doorbell
- 2nd Generation of Ring Video Doorbell
- Ring Video Doorbell 3 and 3 Plus
- Ring Video Doorbell 4.
By using them, let’s explore the patterns of light and tell the meaning of them.
Spinning Around:
A normal press button on a Peephole Cam or Ring Doorbell Wired shows with blue light flashing that rotates around it.
Moving Upward:
Like the old models of Ring Video Doorbells, when a flashing blue light is moving in an upward direction it means throughout the early setup your device is busy in making a connection with the network.
Four Blue Light Flashes:
If your device flashes four times it shows your device is finished with its setting up process and successfully makes a pair to a network.
Blue Circle:
When you notice a blue circle light up and repeat after 1-second pauses. Then it means your device is booting up. Furthermore, the blue circle flashing stops after the device booting up is over. Additionally, after updating the firmware of your doorbell you will be able to see the pattern of blue light.
Blue Circle
Solid Blue Light:
When the Ring Peephole Cam or speaker of the Doorbell Wired is permitted. Then on the LED indicator, a solid blue light flash will show.
Rapid Flashing:
A burst of blue light flashing quickly points out that your device has restored the factory setting to default. When your factory resetting is completed successfully then a quick blue light flash will appear by white light spinning.
Ring Video Doorbell Pro and Pro 2:
Ring Video Doorbell Pro and Pro 2
Spinning Around:
When the Pro and Pro 2 models’ front buttons are pressed then for a few seconds, blue light flashes will rotate around the circular LED light.
Moving Upward:
Like all the models of Ring Doorbell, if the blue light is moving upward it shows your device selecting a Wi-Fi network for connection.
Four Blue LED lights:
Same as all Ring Doorbell devices, 4 blue LED light flashes 4 times which shows that your device completes the setup.
Blue Circle:
For 1-second pauses, if a LED light flashes blue then it means that after tuning it on your device is busy booting up, updating, or restarting.
Solid Blue Light:
A solid blue light specifies that you’re the speaker of your device.
Quick Flashing:
It indicates that the Ring Doorbell Pro or Pro 2 has restored its default setting or has been restored.
Top Half LED:
You may also see a flashing blue light top half circular LED indicator on the models of Pro and Pro 2. This light pattern is different and depends upon the state of your Doorbell. The Top half flashing shows you enter the incorrect password. After completing its setup, if the blue light appears then it means your device is on charging.
How to fix the doorbell with a nonstop flashing blue light?
When faced with a problem, why is my ring doorbell flashing blue and your doorbell continuously flashes for a long time? Then there is something wrong with it and it stops your doorbell from working properly. Furthermore, one of the main reasons for this is that your devices might be caught in a loop boot. The only solution to this problem is to reset your doorbell.
Here are the steps on how you can reset your ring doorbell:
- On your ring device first find the reset button. The reset button depends upon its model; it might be black or orange. Moreover, find the reset button on the right side or back side of the device.
- When you find the button, for 15 seconds press and hold it.
- Once the 15 seconds are complete then release the button. Then there is a light flash on the front of the device for a few seconds. This indicates that your ring doorbell is reset.
- After almost 5 minutes, your device factory resetting is complete.
- Now, again press the black or orange button to put your device on setting up mode.
Other problems that affect your ring doorbell:
Behind your flashing blue light doorbell, there might be other issues with your doorbell. Moreover, the most common issue is why is my ring doorbell flashing blue may also be the reason that your device’s circular light flashes relate to your Wi-Fi. There are a lot of issues that occur if your doorbell is not connected to a reliable Wi-Fi network.
Wi-Fi Issues:
Your Ring doorbell will lose its connection with Wi-Fi if these signs appear:
- Whenever you push the ring button you hear a sound.
- The circular light ring doorbell glows in a soft white.
- From your Ring app, you don’t get any of the notifications.
- In your ring app, you don’t capture any of the events.
Wi-Fi Issues
Checking the Wi-Fi Signals:
When these signs appear it means your Wi-Fi signals are not strong.
- The video quality is poor.
- You don’t get your notification on time.
- You don’t receive notifications frequently.
- It does not connect with the live view.
- If it connects to the live view, then to connect it might take a few seconds.
Power Issue:
Another reason you may face why is my ring doorbell flashing blue because of insufficient power supply. To work properly your device needs enough voltage. Moreover, most users choose to get an extra transformer because it will not be able to show the video. In addition, to check that your device has an issue with insufficient power then find these signs:
- In the live event mode, your ring doorbell is frozen.
- It may lose its connection from time to time.
- The night vision stops working.
Power Issue
Unit Issue:
At last, your doorbell also gives a sign that your unit is faulty. If you face this problem, then contact ring customer support. To determine the problem, they may ask you to send a picture or video of your device for help. If the ring’s customer support confirms that there is a bug in your device, then you need to replace it with a new one.
Can you customize the pattern of your Ring Doorbell LED?
No, you can’t customize your Ring Doorbell LED pattern or light. Eventually, all the settings of your Ring LED are already set. This shows that you cannot change your ring doorbell light pattern or its brightness for certain activities or states.
Troubleshoot your ring doorbell flashing blue:
To troubleshoot why is my ring doorbell flashing blue, you need to follow these steps:
- Find out why your ring doorbell is flashing blue light
- Check the internet connection with your Ring Doorbell
- Reset or Restart your Ring Doorbell
- For more assistance, contact Ring support
Frequently Asked Questions:
Q. Why is my Ring Doorbell flashing blue but not charging?
If your ring doorbell flashes blue light it means your doorbell is on charging. Allow your doorbell a few hours to complete its charging. If the battery level is not updating in Ring App, try activating a motion or event as this may update the status of your battery.
Q. What do the Ring Doorbell lights mean?
The ring doorbell pro or ring video doorbell 2 consists of an LED light in front of it that shows the unit status. If your ring doorbell indicates a solid white light it means your ring doorbell is on recording or idle mode.
Q. What color should the light be on the Ring Doorbell?
- Booting Up: For one second or more blue circle is flashing
- Speaker Enabled: Solid Blue Light
- Successful Setup: Four LED light flashes almost 4 times
- Setup Fail: on the top white light flashes
Q. Does the blue light on the Ring camera mean someone is watching?
No, it doesn’t mean it. Through the ring Camera, the blue light flashes indicating that your device is configured. You can also say that the features of your camera security are activated.
Summary:
When your ring doorbell is flashing blue light it specifies that during setup your ring doorbell is connected to the network, completes its setup successfully, and at this time it is on charging.
Furthermore, it also means that the ring doorbell is on factory reset, booting up the device, or it presses its front button. Every pattern of blue light LED is different from the other.
Similarly, there are also a lot of reasons when you face the problem regarding why is my ring doorbell flashing blue. If you face more trouble about that then contact ring customer support. They will help you to find out the problem. For more info visit voxblend.com.
