Shiplap Roo Wall Ideas: Inspiring Designs For Your Home

You have a minimum of four roofing alternatives to complete your roof construction. Every type of roofing has an internal tongue and groove ceiling, which is followed by waterproof roofing paper and the final roofing material. Shiplap is the most chosen choice.

So, shiplap roofing is a classic-looking, modern style in architectural design. However, it continues to draw the interest of designers and homeowners alike. Shiplap roofing is an unusual combination of longevity, beauty, and utility.  Therefore, the shiplap roof was first used in the construction of warehouses and sheds.

In the early stages of its production, shiplap roofing was created especially for asphalt shingles.  Many homes older than thirty years have shiplaps below their roofs. It is now a common feature of contemporary residential and commercial buildings.

Overview of Shiplap Roof:

Shiplap roof is a type of wooden board roofing that is found beneath the roof. In its early days of manufacture, shiplap was made perfect for asphalt shingles. For building barns, sheds, and other useful constructions, shiplap boards were an outstanding product.

The question arises of how shiplap achieves the signature look that it offers the interior wall choice for today’s homes. With the passage of time, the style has gained popularity. Also, new materials and installation processes with lower maintenance are often preferred.

The shiplap boards are installed horizontally with a slight overlap between them. A strong seal is produced by this overlapping pattern. It provides shelter from the elements and inclement weather.  It’s a great option for areas where the weather is erratic.

History of Shiplap:

Shiplap is used at first in the shipbuilding process. During the Viking Age it was called the clinker construction.By layering wood planks across the hull, clinker architecture constructed a boat that was waterproof. As time passed it extended more efficiency.

In the early 20th century, the shiplap concept made its way into the construction of buildings. With the passage of time, this technique gained popularity. Today, homeowners use shiplap between a home’s exterior and its structural frame. 

What are the pros and cons of Shiplap Roofing?

There are many advantages to using shiplap in your roof construction, but there are also some disadvantages. However, after knowing the disadvantages you can use the shiplap in your home construction in proper ways.

What are the dimensions of the Shiplap roof?

Shiplap panels are available in different dimensions that affect the aesthetics of the home. The width is selected according to your home construction requirements. Customized sizes option also available. The 5 ½-inch and 7 ¼ -inch are the most commonly used.

However, you can use the one width of the shiplap board in your home style. For a unique look, you can use a mix of the widths. x 6 in. x 12 ft.; Actual: 0.625 in. x 5.37 in. are the actual dimensions of shiplap. 

3 inches: The narrow shiplap boards are mostly used to create a unique design. That can offer a different look and great aesthetic appeal.

6 Inches: Ix6 shiplap boards are the most commonly used width. This 6-inch shiplap size provides the most classic, and versatile look for a variety of architectural styles. 

8 Inches: An 8-inch shiplap board is the widest size that is used to cover a large area in less time. 

12 inches: It is not popular in usage but it is used in some cases to create a unique design. 

Considerations for Installation:

It is more important to understand several factors before installing the shiplap panels. Here are some factors that are listed below. 

Choose material:

Always select the high-quality suitable shiplap panel according to your project requirements. Make sure the properly treated wood has the capacity of long-lasting. Also, examine the weather resistance of the shiplap panel.

Installation Process:

We recommend you hire an experienced professional to install the shiplap roof.  So, the professionals installed them expertly. As a result, the chances of future damage decrease Therefore, the shiplap panel needs to be installed properly and there are no gaps remaining in them..

Proper Insulation:

Maintaining the structural integrity of the shiplap roof depends critically on having enough insulation and ventilation. However, one way to stop moisture buildup and potential harm from temperature variations is to install vents and insulating materials properly.

How to install the shiplap roof?

Installing the shiplap roof is not too difficult. However, you can take the help of the experts to install the shiplap on your ceiling. Follow the instructions on how to install the shiplap roof for proper working. 

Collect the material and Tools:

• Shiplap Boards
•  Hammer
• Stud finder
•  Chalk snap line
•  Saw
• Cordless drill
•  Roofing nails
• Step ladder

Check the Entire Roof:

First of all, examine the roof carefully. If any crack or damage appears, repair it before installing the shiplap. Check that there are no signs of moisture. Moreover, check the plumbing installation to reduce the chances of future damage.

Measure the Roof Dimensions:

Carefully make planning of the layout that contributes to a balanced appearance after completing the project. Measure the accurate dimensions of the roof. Now, calculate the required amount of shiplap to know how much shiplap you will need for your project..

Shiplap Boards Cutting:

Now, cut the shiplap boards by using the saw in the required length. Remember to pay attention to the corners and angles on the roof. Make sure that each shiplap board is installed securely during the installation.

Clean the Entire Roof:

In the next step, prepare the roof. To prepare it removes all the ceiling lights, recessed lights, vents, and decor products. Now, clean the roof with a smooth cloth gently to remove the dirt, debris, or any obstruction.

Install the Protected Layer:

In the future to protect the roof from moisture install a layer of waterproof underlayment on the roof. This additional addition helps to protect your roof against the elements and increases your roof’s longevity and functionality.

Start Installation:

Now, install the first board of the shiplap at the bottom edge of the roof. so, the nail gun to attach the board. However, ensure that the board is set correctly. Then the nail through the top and bottom of each board where it crosses a stud until you finish the starter.

Now continue the process of installing the shiplap one by one. Also, examine the gaps and make sure that each board is installed properly. Because it is essential to prevent any water penetration that can cause roof damage.

Apply Waterproof Paints:

In the last step, you apply the waterproof sealant to the shiplap boards. This waterproof sealant helps to secure your roof efficiency.  Moreover, you can paint the boards according to your desire to enhance the aesthetic appeal of the shiplap roof.

Last Examine:

After completing your project ensure that the shiplap is installed professionally. Make sure there are no gaps and shiplap board looseness. Shiplap requires regular maintenance to enhance its longevity. So, examine its efficiency on a regular basis, and if any cracks and leakage issues appear, repair it soon.

How to install the shiplap on wall?

You can install the shiplap on the wall very easily. It’s not too difficult to install the shiplap panel but you can seek the help of a professional for proper installation. 

Collect the material:

• Shiplap
• Drop Cloth
• Nano White Paint
• Paint Roller and Frame
• Pencil
• Construction Adhesive
• Caulk Gun
• Finishing Nails
• Chalk Reel Kit

Measure for Material:

First of all, you measure the wall space. So, you will know how much shiplap you will need for your project. Measure the height and divide the height of each wall by the width of the board you plan to use. For example, a wall that is 96 inches tall would require 16 rows of 6-inch-wide shiplap.

96” Tall/16 Rows of 6” shiplap

Note:

• If you are calculating the square footage do not forget to subtract windows and door space.

Prepare Wall:

In the next step before getting started remove outlet covers switch plates and any nails from the wall. If there is existing molding, you plan to use it again and pry it off carefully. Now, using a stud finder marks the location of each state along the wall.

Note: 

• If the boards are not prefinished be sure to paint or stain them before installing. 
• If your product requires a gap between boards, you may need to paint the wall prior to installation. 

Prepare starter Row:

Now, make a level horizontal line indicating the bottom edge of your starter row at the top of the wall. If the first row is the level of your installation it will be too. 

Note: 

• The board may need to be trimmed horizontally to fit your wall. Make adjustments to the bottom row so it’s less noticeable. 

Install Starter Row:

To install the first row line up the top edge of the first board with the guideline. You created making sure the shiplap either lays on or overlaps a stud. Use adhesive to glue the board down first or have a partner hold it in place. Then the nail through the top and bottom of each board. Where it crosses a stud until you finish the starter.

Note: 

• You can attach the shiplap with construction adhesive nails or both. 
• The installation method works for a variety of reclaimed or appearance boards available at the Home Depot. 

Stagger and space boards:

Row placement is important as you move down the wall. Make sure the chopped ends are spaced out evenly among the rows.  The boards are to fit at the beginning or end of a row if necessary.

If two boards meet at the same stud position the first piece halfway onto the stud and install it. After it, install the next piece on the same stud. Till the wall is finished, keep going with this method. 

Note: 

• If your shiplap requires a gap between boards, use nickels as spacers. 
• Your outlets and switches create a paper template of the opening, then trace it onto the board and cut away. 

Attach Baseboards:

Finally, add matching baseboards and molding using construction adhesive or finishing nails with clean lines and simple installation. 

Note: 

• Your baseboard trim can cover any gaps between your wall and the floor. 

Bottom Lines: 

When you are dealing with a shiplap roof that offers durability, aesthetic appeal, easier installation, and you can install it anywhere. Shiplap panels require proper installation techniques to increase their durability and minimize the risk of future damage. 

Shiplap panels are available in a range of varieties. Natural wood shiplap is not waterproof; thus it is best to stay away from places where moisture can cause harm. While paint or stain are typically used to coat wood boards, they are not completely waterproof.