How to Replace a Kitchen Basin Faucet: A Simple Guide

If you are facing the problem of a leaking kitchen sink faucet or need a smart and affordable replacement to improve its functionality. Don’t worry, you can easily replace the old one with a new one. By doing it yourself, you can save money on plumbing contractors, using the proper tools, and following the right guidelines. So, in this article, we will talk about How to Replace a Kitchen Basin Faucet: A Simple Guide.

How can you replace a kitchen basin faucet?

Replacing a kitchen basin faucet is an easy task. If you want to learn the right guidance, read all the instructions below carefully.

Collect the Safety Tools and Repairing Material

You will need some common tools to repair the faucet to fix it.

Turn of The Supply

• Turn off the water supply lines both hot and cold.
• Switch off the power supply near the basin.
• Close the valve under the sink.

Release Pressure:

You need to open the faucet to get the water out of the faucet. So, if water remains in the pipelines, it will flow from the faucet into the sink. Release it with pressure so all the water comes out of the faucet. Now, check and make sure that all the water comes out and your faucet is empty. 

Empty the Cabinet:

Remove water and dirt from the sink before starting work. Try to empty and dry the sink before replacing the faucet using a towel or smooth cloth. Now, place the bucket under the pipes to catch the water, or place towels under the sink to dry the remaining water in the sink.

Remove the Old Faucet:

Before replacing the new faucet, use a basin wrench to loosen the bolts, nuts, or screws securing the old faucet. After removing the faucet, also remove the old pipelines according to your basin faucet. Now, clean the area around the faucet with the use of rags. 

Prepare the New Faucet:

After removing the old faucet, prepare the new faucet according to the type of faucet used. Apply the plumber’s tape to the water supply line connectors to ensure a watertight seal. Follow these steps carefully to install the new faucet.

Install the New Faucet:

Follow these steps carefully to install the new faucet.

• Install the new plate on the hole in the sink.
• Install the new cartridge in the plate of the sink faucet hole.
• Tight the fastening nut under the sink that holds the whole assembly.
• Place the packing nut and tighten it with the help of the screwdriver.
• Now, connect water supply lines both in hot and cold water. After placing the handle screw it with the help of a screw.
• Connect both hot and cold water supply lines. Connect these pipelines with the help of plumber tape to ensure a watertight seal.
• Tighten all connectors with the help of an adjustable wrench.

Connect Water Supply:

• Open the main water supply.
• Turn on the power supply.
• Turn on both the hot and cold water supply.

Test and Inspect:

After turning on the water supply, run the faucet for one minute to check for proper installation. Check all connectors for leakage problems. If a leak appears to be a problem, handle it properly and fix the leakage problem. 

Conclusion:

There are a variety of kitchen basin faucets that are available in unique styles and fittings. You can easily install a new kitchen sink faucet with a simple task to consider. After following the above instructions on how to replace a kitchen basin faucet: a simple guide., you can successfully replace the kitchen basin faucet without the need for professional assistance and improve the functionality of the faucet.

By doing the job of replacing a faucet by itself, you can also save money. Hence, the learning process can enhance your manufacturing skills and you feel satisfied with the way to handle the issue your house is coming along. Now, after learning and understanding the instructions you go ahead and install a new kitchen basin faucet by itself as a practice. After one or two times practice sessions you will install it professionally.

for more information visit voxblend.com