A lot of new homes install pocket doors but with time they are old and worn out. That’s why these pocket doors start showing gaps when you close them. So, you should know how to remove a pocket door.
If you face any type of difficulty regarding the pocket door you can easily remove and replace them. This seems problematic, but you can also remove the pocket door by yourself. Further , you need to know how to hide an attic door. Don’t worry it is too easy to do and also we will guide you properly on how to remove a pocket door.
What is a Pocket Door?
A pocket door is a modern-style door. These doors don’t take up too much space. Like if you don’t have enough space for a regular door which is open inward or outward. Then, at this time pocket doors are the best choice.
These pocket doors don’t hold too much space. You can simply slide the door and the door slides way into the side walls. Moreover, when the pockets open this makes for a fantastic opening because there is no door in the way.
On the other hand, if you have a swing door in your home and when you open it. It’s going to take a fair amount of space. So, the use of pocket doors can solve a lot of problems and doesn’t take up too much space.
Reasons why you need to remove the pocket door
There are two main reasons why you need to remove the pocket door or why the pocket doors fail:
- The hardware of the door
- Poor Installation
Furthermore, the failure of the pocket door is caused when a crack occurs in the plastic rollers, the doors fall off the track, and when the door tracks are not working properly. On the other hand, there might be a hidden nail end in the pocket door that is continuously scratching and damaging the door.
What can you do to avoid the failure of the pocket door?
Here are some things that you need to do which will help you to avoid the failure of the pocket door.
- The pocket door needs proper installation because poor installation also causes the failure of the pocket door.
- The use of tricky pieces of hardware is essential to install the door.
- Call a finished carpenter and they will come to the site. As they are professionals, they can successfully install the pocket doors.
How to remove a pocket door?
Here are some easy and simple steps on how to remove a pocket door that will surely help you.
Remove the plastic guide
Take a nail gun and simply remove the plastic guide from your pocket door.
Slice the paint firm
Take a sharp utility knife and carefully slice through the paint film on the door trim. It is important to remove the trim with proper attention and care if you want to reuse it.
Pry off the trim
After that with the help of a small pry bar, pry off the pocket door trim. Do it with attention so that the trim won’t damage and you can reuse it whenever you want.
Separate the Pocket Door from Trolleys
Once the trim is removed then close the door and simply lift the door outward away from the open slide of the track from the bottom. This might take a little bit of waving to and fro and adjusting to let loose. You can know about how to open a window from outside.
How can you remove the newly styled pocket door?
If you have the latest and new style pocket door that rides on a trolley. You can easily remove it with the Use of a screwdriver. Disconnect the door by using a screwdriver. Your door is simply removed from the frame.
How can you remove the Older style pocket door?
The older style door rides on a J Track. To remove the door, tilt the bottom out and lift it straight up to get the wheels off the track. Once you have done this, remove the pocket door from its frame.
Frequently Asked Questions:
Q. Can you replace a pocket door without removing the drywall?
Yes, without removing drywall you can simply replace the pocket door. All you need to do is simply remove the door from its sliding track. That’s how you can easily remove a pocket door and repair it.
Q. Can you fix a pocket door without removing the trim?
Some pocket doors fix without removing the trim but some are not. A lot of pocket doors work flawlessly and they cause problems and get stuck or come off the track. So, if you wonder how to remove a pocket door without removing the trim then, these pocket doors require proper fixing.
Q. How much does it cost to remove a pocket door?
It all depends upon the project that what type of things you need for a pocket door such as you might need plumbing, electrical services, waste removal, or mold remediation. Moreover, further things drive up more costs.
No, but you need to conceal the floor guide that is important in how to operate the pocket doors. To protect the pocket door system, the Eclisse is beneath the door profile. This under-door profile is also called an Anti-Warp Profile.
The process of taking away the pocket door with the right tools and techniques is a little bit tricky as well as easy. You can easily remove the pocket door by utilizing some techniques on how to remove a pocket door. However, fixing a pocket door is another option. After removing the pocket door, you can renovate and repair it.
Remember to keep calm and patient while doing the process. You can also take someone’s help if you need it. Moreover, by removing the pocket door, you will surely achieve the goal regarding your home improvement.