How to cut metal closet rod? Step-by-Step Guide

Customizing your closet requires certain renovation and proper cutting of necessary components. This definitely enhances the visual outlook of the closet. But in case, the metallic rod of the closet is not perfectly settling inside, you should know how to cut metal closet rod with different mechanical skills and tools.

In this blog, we will be discussing the cutting processes of closet rods with different types of tools. Furthermore, this piece of writing will guide about particular considerations that a person should keep in mind while doing such projects at home.

Step-by-Step guide on cutting a metal closet rod:

Let us jump into the details of each step that is involved in cutting the closet metal rod. Note that we are going to use the electrical saw for cutting the closet rod.

Do the Necessary measurements:

First of all, take out the closet rod and measure the points. After a concise meaurement, you need to mark those points with a marker or pen. These measurements are according to the requirements of the closet. After taking these measurements, you should verify it once so that you do not cut the rod at wrong points. This is an important point in the process of how to cut metal closet rod on your own.

Wear your Safety Kit:

Now, you should have a knowledge about the safety equipmet that is required for doing this task. Only knowledge is not sufficient, you should have that equipment. The safety gear should have;

• A Safety Helmet

• Safety Gloves

• Safety Goggles

So, wear all these tools from the safety kit properly. Make sure, no sensitive part of your body is exposed while cutting the closet rod.

Plug In the Electrical Saw:

The next step in the process of how to cut metal closet rods is carefully plugging in the electronic saw. For this purpose, you should be near the socket to avoid any disturbance by unplugging the saw by pulling or pushing. As you plug in, you should place the edge of electronic saw on the marked points of the closet rod. Now, push the button of electronic saw.

Cut the Metallic Closet Rod:

As, you push the button of electronic saw, it will start operating. When you have placed it on the marked points, it will start piercing and cutting the metallic rod. There will be flames popping out of the metal surface of the rod. In a matter of seconds, you will be able to cut the rod in two halves. However, this method is effective for cutting a rod that is not hollow.

Now, you can repeat this process of cutting at each marked point of the rod. Make sure you take out your finger from the ON button of the electronic saw after cutting the rod from one point. After placing the edge of the saw on the second point, press the ON button again for cutting.

How to cut metal closet rod manually?

A metallic rod can be cut with differnet tools manually in case you do not have access to any electrical component or tool. So, we will discuss how to cut metal closet rod without electrical tools.

Manual Hacksaw:

Using a hacksaw manually can also help you in cutting the closet rod. For this purpose, you can take help from another person to complete the task in less time. Otherwise, you can do it alone but that require extra time and physical energy. Mark the point on the rod and place the saw on that point. Now start cutting the rod from that point by moving the saw on that point to an fro.

Using a Utility Knife:

If the closet rod is a hollow from inside, then a utility knife might do the trick for you. For cutting this rod with knife, make sure the kife is sharp and an have little edges. Repeat the porcess like you did with a hacksaw. As the rod is hollow, a knife will cut after some time.

Tin Snips for cutting Metallic Closet Rod:

If the rod is of normal metal quality and hollow inside, tin snips can also cut it into two halves. Make sure you wear proper safety gloves and other saftey equipment. Furthermore, the size of tin snips should be large enough to hold the rod inside its claws.

What should you consider before cutting the closet metal rod on your own?

There are certain points that you need to consider while doing such risky task of cutting a metalic rod on your own.

Follow Safety Protocols:

As we have already discussed that cutting a metallic rod of closet involves sharp and dangerous tools. So, it is better to follow all the safety protocols to make sure you do not injure yourself. These safety protocols are wearing complete safety kit and use every gear that is important and helpful while cutting metal rod. Use a safety helmet, safety goggles, gloves, and proper covering of exposed body parts.

Reading Usage Manual of Tools:

Before using any tool, make sure you go through its usage manual to get a helpful insight into using that particular tool. In case you are wondering how to cut a metal closet rod, you need a hacksaw for manual cutting. So, first of all, read how to use the hacksaw efficiently without injuring yourself in the usage manual. If you are using an electronic saw, read all the instructions for usage properly and follow them with an active mind.

Clear the Working Space before cutting:

Finally, make sure no children or any other irrelevant person is present in your working space. Furthermore, clear the space by putting other objects in different rooms. This is because in case you make any mistake while cutting the closet rod, no other person is at risk of injuring himself.

FAQs

Q. How to cut metal rod without power tools?

In case, you do not have power tools for cutting metal rods, there is nothing to worry about. We will tell you about many other tools that are quite effective in cutting metals. So, in the absence of electrical tools, you can use tin snips, bench shear, chisel, Hacksaw, and a utility knife can help you cut any metal. But, it is important to know that these tools are effective only in cutting metals 

Q. What tool do you use to cut metal rods?

There are different options available for cutting a metal rod, but it depends on the nature and size of the project you are handling. For smaller projects, you can use a hacksaw for cut small rods. This is because of its convenience and very reasonable pricing. Other electrical pieces of equipment that can help you cut metals are expensive and require special experience for use.

Q. What tool is used to cut a wardrobe rail?

One of the most effective tools for cutting a wardrobe rail is using a manual hacksaw. It is more convenient to cut the rail with a hacksaw than any other physical tool. 

Q. How to cut metal closet rod in a decorative manner?

For cutting a decorative metal, you can use different tools but it depends on the type of cutting you want to do. If you are looking to cut decorative metal simply, then you can use an electric or manual saw.  In case, you are looking to cut on a certain curvy decorative pattern, you might need tools like metal nibblers, tin snips, or dremels.

Bottom Line:

There are certain steps that are involved in cutting a metal rod. However, this blog clearly describes each step that you should follow in particular order in case you are wondering how to cut metal closet rod. Additionally, you need to consider key points like your safety while doing such risky work on your own. We would recommend that you not do such projects on your own until you have enough experience handling tools like hacksaws, tin snips, or electronic saws.

For more detailed information visit voxblend.com